Pullman Holt GB1400E Instrukcja Użytkownika Pobierz pdf (Strona 15)

SCHEDULED MAINTENANCE

1. CLEANING THE SQUEEGEE TUBE

Check the squeegee tube for clogging if the suction is insuffiecient or at periodic intervals.

To clean the tube proceed as follows:

1. Remove the tube from the sleeve on the squeegee

2. Remove the other end from the recovery tank

3. Wash the inside of the

is inserted

tube with a jet of water, spraying from the end where the tank

4. Reinstall the tube

ATTENTION: Do not wash the tube running between the

suction unit and the suction cap.

2. CLEANING THE SOLUTION TANK AND FILTER

1. Remove the recovery tank.

2. Remove the quick connection to avoid breaking the connection itself.

3. Remove the two screws fixing the solution tank to the frame.

4. Remove the solution tank by pushing it forwards and unhooking it from the fixing

bracket.

5. Loosen the solution tank cap.

6. Remove the filter and clean it.

7. Rinse the tank and clean with a jet of water.

8. Reinstall the filter and cap.

9. Reinstall the tank, carrying out the above operations in the reverse order.

ATTENTION: Always wear gloves when doing this operation to

protect yourself from contact with hazardous solutions.

1 2 ... 10 11 12 13 14 15 16 17 18

Brak uwag

Pullman Holt GB1400E Instrukcja Użytkownika Strona 15